To Next Page

To Previous Page

Components

IP:

For instructions on using the power tilt

switch, see pages 48 and 50.

EMU31432

Steering friction adjuster

A friction device provides adjustable resis-

tance to the steering mechanism, and can be

set according to operator preference. An ad-

juster lever is located on the bottom of the

tiller handle bracket.

To increase resistance, turn the lever to the

port side “A”.

To decrease resistance, turn the lever to the

starboard side “B”.

WARNING

EWM00040

Do not overtighten the friction adjuster. If

there is too much resistance, it could be

difficult to steer, which could result in an

accident.

If the resistance does not increase even

when the lever is turned to the port side “A”,

make sure that the nut is tightened to the

specified torque.

IP:

●

Steering movement is blocked when the

ZMU04899

ZMU05579

1. Nut

Nut tightening torque:

6.0 Nm (0.6 kgf-m, 4.3 ft-lb)

ZMU05522

ZMU05523

Yamaha F20B User Manual

Questions and Answers: