5-19
COOLANT PRESSURE METER
The coolant pressure meter provides a warning for the operator when there is a problem with the
cooling system.
* For all in-line cylinder models, the position for installing the sender shares the coolant temperature output.
Therefore, either the coolant temperature meter or the coolant pressure meter can be used for one engine.
* However, on V4, V6, and F150 models, both meters can be used for one engine.
COOLANT PRESSURE METER APPLICATIONS
ADDITIONAL PARTS REQUIREMENTS
COOLANT PRESSURE METER DIMENSIONS
COOLANT PRESS. SENDER INSTALLATION
The method for installing the coolant pressure sender is the same as the coolant temperature
sender. See the installation instruction to the sender in the coolant temperature meter on page 5-21.
Ref. No. Description Part No. Applicable model
1
kPa, Black panel 6Y7-83660-00
40 [3-cyl] – 300
F20 [65P] – F250 [6P2]
kPa, White panel 6Y7-83660-20
2
psi, Black panel 6Y7-83660-10
psi, White panel 6Y7-83660-30
Description Part No. Remarks
Sender 688-83667-00 With 10 m (32.8 ft) tube
12
60 (2.36)
11 (0.43) 18.9 (0.74)
42 (1.65)
52 (2.05)
mm (in.)
To meter
M14 X 1.5
To Next Page
Loading...
Need help?
General
