Yamaha F20BMH User Manual

7-5
BATTERY WIRING
RECOMMENDED EXTENSION LENGTH OF BATTERY CABLES
If the battery cables are extended, follow the requirements in the table due to the battery capacity,
cable size and atmosphere temperature.
The length of extension battery cable means the total length of (+) and (–) cables.
Be sure to select an extension battery cable and a terminal that meet ABYC requirements or equiv-
alents.
Use a best-suited stud to the terminal size.
Give solder to the connection of terminals and cables to prevent them from corroding.
Coiling and/or looping battery cable should be inhibited because of a power loss.
NOTICE
Do not exceed the recommended extension length of battery cable.
Otherwise, the electrical system can allow poor performance or damage.
* L/H rotation model has the same spec as R/H model.
Atmosphere temperature is 0°C (32°F) and above
Applicable models
Battery Maximum total extension length
Unit Minimum rating
AWG4
(20 mm
2
)
AWG2
(30 mm
2
)
AWG1/0
(50 mm
2
)
AWG2/0
(60 mm
2
)
Carbureted V6 (2.6L)
F115
CCA/SAE 380 Amps
3.9 m
13 ft
6.7 m
22 ft
10.3 m
34 ft
—
MCA/ABYC 502 Amps
RC/SAE 124 Minutes
CCA/EN 430 Amps
20HR/IEC 70 Ah
JIS 65D31
HPDI V6 (2.6L)
CCA/SAE 512 Amps
8.3 m
27 ft
14.2 m
47 ft
22.0 m
72 ft
—
MCA/ABYC 675 Amps
RC/SAE 182 Min
CCA/EN 711 Amps
20HR/IEC 100 Ah
JIS 95E41
Carbureted V6 (3.1L)
HPDI V6 (3.3L)
F200-F250
CCA/SAE 512 Amps
5.4 m
18 ft
9.2 m
30 ft
14.2 m
47 ft
—
MCA/ABYC 675 Amps
RC/SAE 182 Min
CCA/EN 711 Amps
20HR/IEC 100 Ah
JIS 95E41
F150
CCA/SAE 512 Amps
6.0 m
20 ft
10.0 m
33 ft
16.0 m
52 ft
—
MCA/ABYC 675 Amps
RC/SAE 182 Min
CCA/EN 711 Amps
20HR/IEC 100 Ah
JIS 95E41
F300-F350
CCA/SAE 700 amps
3.8 m
12 ft
6.4 m
21 ft
10.0 m
33 ft
11.8 m
39 ft
MCA/ABYC 900 amps
RC/SAE 170 min
CCA/EN 670 amps
20HR/IEC 110 Ah
JIS 120E41
To be continued.

Yamaha F20BMH Specifications

General

Brand	Yamaha
Model	F20BMH
Category	Outboard Motor
Language	English