Yamaha FZ-07 2016 - Lighting Unit and License Plate Maintenance; Replacing Turn Signal Light Unit; Replacing the License Plate Light Bulb

Periodic maintenance and adjustment
7-37
7
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
EAU59890
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
2. Remove the burnt-out bulb by
pulling it out.
1. Turn signal light bulb socket
1. Turn signal light bulb
1
1
1. License plate light unit
2. Collar
3. Washer
4. Nut
5. License plate light bulb socket
1
2
2
5
3
4
34
UBU270E0.book Page 37 Monday, November 14, 2016 8:53 AM