7-42
E
– +
ELEC
STARTER MOTOR
6. Inspect:
• Armature coil continuity
Out of specification → Replace.
Armature coil continuity:
Commutator segments 1 Continuity
Segment - Laminations 2 No continuity
Segment - Armature shaft No continuity
Brush holder inspection
1. Measure:
• Brush length a
Below specification → Replace.
Brush length:
12.5 mm (0.49 in)
Wear limit:
6.5 mm (0.26 in)
2. Check:
• Brush holder continuity
Out of specification → Replace.
Brush holder continuity:
Brush holder - Base No continuity
Starter motor front cover inspection
1. Inspect:
• Starter motor front cover oil seal
Damage/wear → Replace the starter
motor front cover.
To Next Page
Loading...
Need help?
General