7-60
E
– +
ELEC
REMOTE CONTROL SYSTEM
(DELUXE MODEL ONLY)
Checking the remote control transmitter
1. Check:
• Remote control transmitter
Does not operate → Replace the remote
control transmitter.
Checking steps:
CAUTION:
If the buttons on the remote control
transmitter are pushed but the transmit-
ter does not operate, the battery may be
low.
• Press the lock button 1 of the remote
control transmitter. The beeper sounds
once.
• Check that the “SECURITY” indicator
light goes off and that the engine cannot
be started.
• Press the unlock button 2 of the remote
control transmitter for a short time. The
beeper sounds two or three times.
• Check that the “SECURITY” indicator
light comes on and that the engine can
be started.
• Press the unlock button for more than 4
seconds to select the low-rpm mode.
• Check that the beeper sounds three
times and that the “L-MODE” indicator
light comes on.
Number of
beeps
Yamaha
Security
System mode
Engine
startability
1 beep Lock Unable
2 beeps
Unlock
(normal mode)
Able
3 beeps
Unlock
(low-rpm
mode)
Able
1
2
To Next Page
Need help?
General
