EasyManuals Logo

Yamaha WR250X User Manual

Yamaha WR250X
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
INSTRUMENT AND CONTROL FUNCTIONS
3-6
2
3
4
5
6
7
8
9
push either select button to set the
hours.
3. Push the “RESET” button, and the
minute digits will start flashing.
4. Push either select button to set the
minutes.
5. Push the “RESET” button, and the
second digits will start flashing.
6. Push either select button to set the
second digits to zero.
7. Push the “RESET” button for at
least two seconds, and then re-
lease it to start the clock.
TIP
When setting the clock, push the
“SELECT 1” button to increase the
digits or “SELECT 2” button to de-
crease the digits. Pushing and
holding either button will increase
or decrease the digits continuously
until the button is released.
If the “RESET” button is not
pushed within 30 seconds, the
clock will not be set and will return
to the prior time.
Changing from the basic mode to
the measurement mode
With the odometer selected, push the
“SELECT 1” button and “SELECT 2”
button together for at least two seconds
to change to the measurement mode.
Changing from the measurement
mode to the basic mode
TIP
The stopwatch must be stopped before
changing to the basic mode.
1. Check that the stopwatch is not in
operation. If the stopwatch is in op-
eration, stop it by pushing the “SE-
LECT 1” button and “SELECT 2”
button together.
2. Push the “SELECT 1” button and
“SELECT 2” button together for at
least two seconds to change to the
basic mode.
Measurement mode (for the stop-
watch)
When the measurement mode is se-
lected, the stopwatch is displayed and it
can be started manually or automatical-
ly.
Manual start
The manual start is the default setting
for the stopwatch. The stopwatch indi-
cator “ ” and the distance-compensa-
tion tripmeter indicator “ ” will start
flashing.
1. Push the “RESET” button to start
the stopwatch.
2. Push the “SELECT 1” button and
“SELECT 2” button together to
stop the stopwatch.
3. To resume stopwatch counting,
push the “SELECT 1” button and
“SELECT 2” button together.
To reset the stopwatch to zero,
push the “RESET” button for at
least two seconds.
TIP
The stopwatch will continue counting
32D-28199-EB.book 6 ペー 2013年7月3日 水曜日 午前11時8分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha WR250X and is the answer not in the manual?

Yamaha WR250X Specifications

General IconGeneral
Displacement250cc
Bore x Stroke77.0mm x 53.6mm
Compression Ratio11.8:1
Fuel SystemFuel Injection
Final DriveChain
Front Tire110/70-17
Rear Tire140/70-17
Seat Height35.2 in
Fuel Capacity2.0 gal
Engine TypeLiquid-cooled DOHC 4-stroke; 4 valves
IgnitionTCI (Transistor Controlled Ignition)
Front SuspensionInverted fork
Rear SuspensionSingle shock
Front Brake298mm hydraulic disc
Rear Brake230mm hydraulic disc
Transmission6-speed

Related product manuals