EasyManuals Logo

Yamaha WR250X User Manual

Yamaha WR250X
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
OPERATION AND IMPORTANT RIDING POINTS
5-3
2
3
4
5
6
7
8
9
EAU16811
Tips for reducing fuel
consumption
Fuel consumption depends largely on
your riding style. Consider the following
tips to reduce fuel consumption:
Shift up swiftly, and avoid high en-
gine speeds during acceleration.
Do not rev the engine while shifting
down, and avoid high engine
speeds with no load on the engine.
Turn the engine off instead of let-
ting it idle for an extended length of
time (e.g., in traffic jams, at traffic
lights or at railroad crossings).
EAU16842
Engine break-in
There is never a more important period
in the life of your engine than the period
between 0 and 1600 km (1000 mi). For
this reason, you should read the follow-
ing material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1600 km (1000 mi). The various parts in
the engine wear and polish themselves
to the correct operating clearances.
During this period, prolonged full-throt-
tle operation or any condition that might
result in engine overheating must be
avoided.
EAU17024
0–1000 km (0–600 mi)
Avoid prolonged operation above 1/3
throttle. NOTICE: After 1000 km (600
mi) of operation, the engine oil must
be changed, and the oil filter car-
tridge or element replaced.
[ECA11283]
1000–1600 km (600–1000 mi)
Avoid prolonged operation above 1/2
throttle.
1600 km (1000 mi) and beyond
The vehicle can now be operated nor-
mally.
ECA10271
If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.
32D-28199-EB.book 3 ペー 2013年7月3日 水曜日 午前11時8分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha WR250X and is the answer not in the manual?

Yamaha WR250X Specifications

General IconGeneral
Displacement250cc
Bore x Stroke77.0mm x 53.6mm
Compression Ratio11.8:1
Fuel SystemFuel Injection
Final DriveChain
Front Tire110/70-17
Rear Tire140/70-17
Seat Height35.2 in
Fuel Capacity2.0 gal
Engine TypeLiquid-cooled DOHC 4-stroke; 4 valves
IgnitionTCI (Transistor Controlled Ignition)
Front SuspensionInverted fork
Rear SuspensionSingle shock
Front Brake298mm hydraulic disc
Rear Brake230mm hydraulic disc
Transmission6-speed

Related product manuals