Yamato DNF 400 User Manual

27
Operation Method
Input Program; Set the Temperature
1
Temperature setting procedure
① Select the "Set TEMP" and press the ENTER key. The temperature setting edition screen is
displayed. The blinking "
 " (cursor) goes out and the setting value blinks instead.
Set TEMP
► 0℃
S01
Set TEMP
0℃
S01
ENTER
(Selection screen)
→
(Edition screen)
② Select the temperature using "▼▲" and press the ENTER key. The setting is decided and the
screen returns to the setting item selection screen.
TROUBLE
ENTER
CANCEL
DOO
R
Set TEMP
100℃
S01
→
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
100℃
S01
(Decide the input) (Selection screen)
③ Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
45℃
S01
→
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
0℃
S01
(Cancel the input) (Selection screen)
④ Press the PROGRAM key to display the next selection screen after the temperature setting is
completed.

Yamato DNF 400 Specifications

General

Brand	Yamato
Model	DNF 400
Category	Oven
Language	English