Yamato DNF 400 User Manual

35
Operation Method
Input Program; End Program
1
End program procedure
① Select the "Program End" and press the ENTER key. The program edition is completed.
TROUBLE
ENTER
CANCEL
DOO
R
Program End
S01
→
Standby
2002/01/01 12:00
② The program edition has not done if the POWER or CANCEL key is pressed before pressing the
"Program End" at the end of program edition.
③ Make sure to press the "Program End" after program edition.
The "Program End" can be set at any steps in addition to at the edition step.

Yamato DNF 400 Specifications

General

Brand	Yamato
Model	DNF 400
Category	Oven
Language	English