Yealink MP54 User Manual

Use EXP50 Expansion ModuleUse EXP50 Expansion Module
IntroductionIntroduction
When connecting the EXP50 expansion module to your phone, you can specify the group of Teams contacts to
display on the EXP50 expansion module. Therefore, you can quickly call the contact by pressing the corresponding
EXP key. You can also view your Teams contacts’ presence from your expansion module.
Supported PhonesSupported Phones
EXP50 expansion module is available to MP58, MP56 and VP59.
How to Connect EXP50How to Connect EXP50
To easily connect the EXP50 to the phone, please unplug the phone stand from the IP phone.
Step 1: Unplug the stand from the IP phoneStep 1: Unplug the stand from the IP phone
1. Unplug the power adapter and Ethernet cable from the IP phone.
2. Unplug the handset attached to the IP phone.
3. Turn the IP phone over and lay it on a non-slip, flat surface.
4. Unplug the stand from the IP phone.
Step 2: Connect the EXP50Step 2: Connect the EXP50
1. Turn over the phone and expansion module, and lay them on a flat, non-flat, non-slip surface.
2. (Optional.) The slots of IP phone may be plugged up by silica gel. You can pull out the silica gel.
 TIPTIP
The volume will be synchronized between the speakerphone and the phone. For more information, refer to
Yealink USB Speakerphone CP700 & CP900 User Guide .
 NOTENOTE
Power is automatically transferred from the host phone to the expansion module(s) upon connection. If you
want to use more than one expansion modules on a single phone, you need to connect an additional Yealink
power adapter (5V/2A) to any one of the expansion modules.
The power adapter should be purchase separately.
User Guide
91
Yealink Teams Phone
User Guide
GoMomentum.com/support | 888.538.3960
91

Yealink MP54 Specifications

General

Brand	Yealink
Model	MP54
Category	IP Phone
Language	English