EasyManuals Logo
Home>Yealink>IP Phone>SIP-T40G

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
167
Phone Model Supported Audio Codecs
Default Audio
Codecs
CP920
G.722.1c (48kb/s), G.722.1c (32kb/s),
G.722.1c (24kb/s), G.722.1 (24kb/s), G722,
PCMU, PCMA, G729, G726-40, G726-32,
G726-24, G726-16, G723_53, G723_63,
Opus, iLBC_15_2kpbs, iLBC_13_33kpbs
G.722.1c (48kb/s),
G.722.1c (32kb/s),
G.722.1c (24kb/s),
G.722.1 (24kb/s),
G722, PCMU, PCMA,
G729
Audio Codecs Configuration
The following table lists the parameters you can use to configure the audio codecs.
Parameter
account.X.codec.<payload_type>.enable
[1]
<MAC>.cfg
Description
It enables or disables the specified audio codec.
The name (payload_type) of the audio codec:
g722_1c_48kpbs-G.722.1c (48kb/s) (only for CP920)
g722_1c_32kpbs-G.722.1c (32kb/s) (only for CP920)
g722_1c_24kpbs-G.722.1c (24kb/s) (only for CP920)
g722_1_24kpbs-G.722.1 (24kb/s) (only for CP920)
g722-G722
pcmu-PCMU
pcma-PCMA
g729-G729
g726_16-G726-16
g726_24-G726-24
g726_32-G726-32
g726_40-G726-40
g723_53-G723_53
g723_63-G723_63
opus-Opus
ilbc_15_2kpbs-iLBC_15_2kbps
ilbc_13_33kpbs-iLBC_13_33kbps
Example:
account.1.codec.g722.enable = 1
Note: The name of the audio codec in this parameter should be the correct one as listed in the above
example, otherwise the corresponding configuration will not take effect.
Permitted
Values
0-Disabled
1-Enabled
Default
Default:
When the audio codec is G.722.1c (48kb/s), the default value is 1;
When the audio codec is G.722.1c (32kb/s), the default value is 1;

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals