EasyManuals Logo
Home>Yealink>IP Phone>SIP-T40G

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #256 background imageLoading...
Page #256 background image
Phone Customization
253
Devices
Parameter
features.headset_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s headset mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.headset.group_listen_in_talking_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to enter into the group listening mode by pressing the Speakerphone
key when you first answer the call using the headset.
Note: The audio is sent only through the headset. So you are able to speak and listen through the
headset, but you can only listen through the speaker. It is not applicable to Bluetooth headset.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S and T27G
Parameter
phone_setting.headsetkey_mode <y0000000000xx>.cfg
Description
It configures headset mode during a call.
Permitted
Values
0-Always use (pressing the Speakerphone key and picking up the handset are not effective when the
headset mode is activated)
1-Use as normal
Default
1
Supported
Devices
All phones except CP920
DSS Keys
There are three kinds of DSS keys: Line Keys, Programmable Keys, and Ext Keys. You can assign various functions
to DSS keys. This section explains how to set these keys.
Line key is not applicable to T19(P) E2/CP920 phones, ext key is only applicable to expansion modules connected
to T57W/T54W/T53W/T53/T48U/T48S/T48G/T46U/T46S/T46G/T43U/T29G/T27G phones.
Note: If the phone is downgraded to an earlier firmware from firmware version 83, the DSS key configuration will be reset
after downgrading.
Topics
Supported DSS Keys
Supported Dsskey Types
Line Keys
Programmable Keys
Ext Keys
Dsskey Lock Configuration
Dsskey Page Reset Configuration

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals