User Guide for T4 Series IP Phones
136
4. Click Confirm.
Dynamic Forwarding
You can manually forward the call to another number while your phone rings.
Procedure:
1. When the phone is ringing, press Forward.
2. Enter the number you want to forward the incoming call to.
3. Press the OK key, # key, or Send.
On the SIP-T48S/T48G IP phone, press the OK key, # key, or tap Forward.
The LCD screen prompts a call forward message.
When your phone is ringing, you can also press a Forward key (refer to Configuring a Forward
Key) to forward the call to the pre-defined number directly.
Call Transfer
You can transfer a call to another party during a call in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.
Semi-Attended Transfer: Transfer a call when receiving ringback.
Attended Transfer (Consultative Transfer): Transfer a call with prior consulting.
Configuring Transfer Mode via Dsskey
When there is a call (either active or hold/held) on the IP phone, you can transfer the call
differently using a Transfer key, BLF/BLF List key or Speed Dial key. The phone behavior depends
on the configuration of Transfer Mode via Dsskey.
Procedure:
1. Click Features->Transfer.
Downloaded from ManualsNet.com search engine