Yealink SIP-T40G User Manual

User Guide for T4 Series IP Phones
84
On the SIP-T48S/T48G IP phone, tap Save.
Adding a contact to the local directory is configurable via web user interface at the path
Directory->Local Directory.
Mobile Contacts
On SIP-T48S/T48G/T46S/T46G IP phone, after your Bluetooth-enabled mobile phone is paired
and connected, you can temporarily synchronize mobile phone contacts. The mobile phone
contacts will be imported to your IP phone under Mobile Contacts directory. You can add
mobile contacts to the local directory or blacklist, but you cannot add a contact to Mobile
Contacts directory on your IP phone.
For more information, refer to Syncing the Mobile Contacts to the IP Phone.
Note
Adding a Contact to the Local Directory
1. Navigate to Menu->Directory->Mobile Contacts.
On the SIP-T48S/T48G IP phone, you can also tap Directory->Mobile Contacts.
2. Highlight a desired contact, and then press Option.
On the SIP-T48S/T48G IP phone, tap after the desired entry.
3. Select Add to Contact.
On the SIP-T48S/T48G IP phone, tap Add.
4. Edit the corresponding fields.
5. Press Save.
The entry is successfully saved to the local directory.
Adding a Contact to the Blacklist Directory
1. Navigate to Menu->Directory->Mobile Contacts.
2. Highlight a desired contact, and then press Option.
If you disconnect the Bluetooth-enabled mobile phone from IP phone or disable the IP phone to
sync phone contacts, the mobile contacts will not display.
Downloaded from ManualsNet.com search engine

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm