Yealink SIP-T40G User Manual

Advanced Phone Features
187
After configuring an ACD key, you can press the ACD key to log into the ACD system. After
logging in, you are ready to receive calls from the ACD system. You can press the ACD key to
show your current ACD user status. You can press the Available (Avail)/Unavailable (Unavail)
soft key to change your ACD user status. ACD user status synchronizes on both IP phone and
ACD system.
When you set the ACD user status to be available, the ACD key icon indicator will become
and solid on the SIP-T48S/T48G IP phone, the ACD key LED glows green, and then the server
begins distributing calls to your IP phone.
When you set the ACD user status to be unavailable, the ACD key icon indicator will become
on the SIP-T48S/T48G IP phone, the ACD key LED flashes green, and then the server temporarily
stops distributing calls to your IP phone. To log out of the ACD system, press the Logout soft
key.
Note
Shared Call Appearance (SCA)
You can use SCA feature to share an extension which can be registered on more than one IP
phones at the same time. The shared line is indicated by a different line icon.
In the following figure, the first line is a private line while the second line is a shared line:
If two phones share a line, an incoming call to this extension will cause both phones to ring
simultaneously. The incoming call can be answered on either phone but not both.
This feature is very useful in the boss and secretary scenario. For example, the boss shares his
extension with the secretary. When there is an incoming call to the extension of the boss, both
the phones of the boss and the secretary will ring simultaneously, and either the boss or the
secretary can answer the call. Calls on the shared line can be placed on hold, barged in or
retrieved from another shared phone.
It is recommended that you configure only one ACD key per phone, since only one ACD key can
be in use on your phone at any time.
Downloaded from ManualsNet.com search engine

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm