Basic Call Features
155
Anonymous Call Rejection
Anonymous call rejection, which is configurable on a per-line basis, allows you to automatically
reject incoming calls from callers who have blocked their caller ID information (including name,
phone number, etc.). You can also configure the phone to send anonymous call rejection on/off
code to the server to activate/deactivate anonymous call rejection on the server side.
Configuring the Anonymous Call Rejection
Procedure:
1. Navigate to Menu->Features->Anonymous.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Features->Anonymous Call.
2. Select a desired line.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, select a desired line from the Line
ID field.
3. Select Enabled from the Local Anony Reject (Local Anonymous Rejection) field.
For the SIP-T48S/T48G IP phone, tap the On radio box of the Local Anony Reject field.
4. (Optional.) Select the desired value from the Send Rejection Code field.
5. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call rejection feature on the phone.
6. Press Save.
Anonymous call rejection is configurable via web user interface at the path Account->Basic.
Downloaded from ManualsNet.com search engine