EasyManuals Logo
Home>Yealink>IP Phone>SIP-T40G

Yealink SIP-T40G User Manual

Yealink SIP-T40G
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
User Guide for T4 Series IP Phones
64
pressing the Speakerphone key, the HEADSET key, the OK key or the
Answer soft key, and end the call by hanging up the handset,
pressing the Speakerphone key, the End Call (EndCall) soft key or the
Cancel key.
For the SIP-T48S/T48G IP phone, the phone lock consists of the following:
LCD screen and all keys are locked except Volume key, digit keys, # key, * key, HEADSET key and
Speakerphone key. You are only allowed to dial emergency numbers, reject incoming calls by
pressing the Cancel key or tapping the Reject soft key, answer incoming calls by lifting the
handset, pressing the Speakerphone key, the HEADSET key, the OK key or tapping the Answer
soft key, and end the call by hanging up the handset, pressing the Speakerphone key, Cancel
key or tapping the End Call (EndCall) soft key.
Emergency Number
Public telephone networks in countries around the world have a single emergency telephone
number (emergency services number), that allows a caller to contact local emergency services
for assistance when necessary. The emergency telephone number may differ from country to
country. It is typically a three-digit number so that it can be easily remembered and dialed
quickly. Some countries have a different emergency number for each of the different emergency
services. The emergency number setting, if desired, must be made before lock activation. For
more information, refer to Configuring the Emergency Number.
Activating the Phone Lock
Procedure:
1. Navigate to Menu->Basic->Phone Lock.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Settings->Basic Settings->Phone Lock.
2. Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then press OK.
For the SIP-T48S/T48G IP phone, tap Save.
3. Select Enabled from the Lock Enable field.
4. Select a desired type from the Lock Type field (except the SIP-T48S/T48G IP phone).
5. Enter the desired interval between 0 and 3600 (seconds) of automatic phone lock in the
Auto Lock field.
If it is set to 0, the phone will not be automatically locked. You need to long press # key to
lock it when the phone is idle.
Downloaded from ManualsNet.com search engine

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals