Yealink SIP-T41P Configuration Guide

Configuring your Phone
5
This guide describes how to configure Yealink SIP IP phones via the following ways:
 Phone User Interface
 CommPortal Phone Configurator
The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. An administrator or a user can configure and use IP
phones via phone user interface. If the administrator wants to deploy small number of
phones, this method can be used. However, if the administrator wants to deploy and
maintain a mass of IP phones, then the CommPortal phone configurator will be
recommended.
You can choose the desired configuration method to operate the phone and change
settings according to actual needs.
You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to the administrator, and the
default administrator password is “admin” (case-sensitive).

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm