Yealink SIP-T41P Configuration Guide

Yealink IP Phones Configuring Guide
40
- If you select Current Lines, the dial-now rule will only apply to current account.
5. Click Save changes to accept the change.
6. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning refer to Downloading
Configuration Files on page 7.
When you enter the number “1234” using the keypad, the phone will dial out “1234”
automatically without the pressing of any key.
Time Out for all Dial-Now Rules
You can configure the delay time for all dial-now rules. That is, you can configure your
phone to automatically dial out the phone number which matches a dial-now rule, after
the designated delay time.
To configure the delay time for dial-now rule via CommPortal phone configurator:
1. Click on Features->Dial Plan.
2. Select the desired value from the Time Out for all Dial-Now Rules field.
IP phone will automatically dial out the phone number which matches a dial-now
rule without pressing a send key.
The default delay time is 4(s).
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm