Yealink SIP-T41P Configuration Guide

Customizing Your Phone
41
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
You can enable live dialpad for the SIP IP phone, which enables the IP phone to
automatically dial out any number entered by user without pressing the send key. You
can also configure a delay time, where the phone will dial out the phone number
automatically after the designated period of time.
To enable the live dialpad via CommPortal phone configurator:
1. Click on Features->Dial Plan.
2. Mark the Enabled radio box of the Live Dialpad Enabled field.
3. Select the delay time from the Automatically Outgoing Delay field.
The default delay time is 4(s).
4. Click Save changes to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm