Yealink SIP-T41P Configuration Guide

Resetting the phone
69
Reset the phone to factory configurations after you have tried all troubleshooting
suggestions but do not solve the problem. You need to note that all customized settings
will be overwritten after reset.
To reset the phone via phone user interface:
1. Press Menu->Settings->Advanced Settings ->Reset to Factory.
2. Press the Enter soft key.
The LCD screen prompts the following warning:
3. Press the OK soft key.
The LCD screen prompts the following:
The LCD screen prompts the following:
The phone will be reset to factory settings sucessfully after startup.
Note
Reset of your phone may take a few minutes. Do not power off until the phone has started
up successfully.
Welcome
Initializing...please wait
Resetting…
Please Wait!

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm