User Manual 3PH HYD5000-HYD20000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1. of 16/03/2021 - Application: GID
Table 17 - List of country codes
7.2.4. Setting of input channel
In the case of a single Pylontech battery tower, set the inputs according to the channel
populated:
• Input channel 1 → BAT input 1 (if the channel populated is no. 1)
• Input channel 2 → Not Used
In the case of a single WeCo battery tower, set the inputs by populating both channels:
• Input channel 1 → BAT input 1
• Input channel 2 → BAT input 1
To Next Page
Loading...
Need help?
General
