Zebra DS4308 Product Reference Guide

RS-232 Interface 8 - 3
RS-232 Parameter Defaults
Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar
code(s) provided in the RS-232 Host Parameters section beginning on page 8-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 8-1 RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard 8-7
Baud Rate 9600 8-9
Parity Type None 8-10
Stop Bits 1 Stop Bit 8-11
Data Bits 8-Bit 8-11
Check Receive Errors Enable 8-12
Hardware Handshaking None 8-12
Software Handshaking None 8-14
Host Serial Response Time-out 2 Sec 8-16
RTS Line State Low RTS 8-17
Beep on <BEL> Disable 8-17
Intercharacter Delay 0 msec 8-18
Nixdorf Beep/LED Options Normal Operation 8-19
Ignore Unknown Characters Send Bar Code 8-19
Note: The DS4308 supports one stop bit only.

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English