Zebra DS4308 Product Reference Guide

4 - 22 DS4308/DS4308P Digital Scanner Product Reference Guide
Hands-Free/Hand-Held Auto Switching (DS4308P Only)
This parameter controls whether the DS4308P automatically switches between hands-free and hand-held
modes. Select one of the following options:
• Presentation (Blink) in Hand-Held and Hands-Free Modes: This prevents the scanner from
automatically switching and is equivalent to setting Hand-Held Trigger Mode to Presentation (Blink) and
Hands-Free Mode to Disable.
• Auto Aim in Hand-Held, Auto Switching to Hands-Free Enabled: This resets Hand-Held Trigger
Mode to Auto Aim and Hands-Free Mode to Enable.
Presentation (Blink) in
Hand-Held and Hands-Free Modes
*Auto Aim in Hand-Held,
Auto Switching to Hands-Free Enabled

Zebra DS4308 Specifications

General

Sealing	IP42
Connectivity	USB, RS232, Keyboard Wedge, TGCS (IBM) 46XX over RS485
Decode Capability	1D, 2D, PDF417
Drop Specification	Withstands multiple 1.5 m (5 ft) drops to concrete
Operating Temperature	32° to 104° F/0° to 40° C
Storage Temperature	-40° to 158° F/-40° to 70° C
Humidity	5% to 95% (non-condensing)
Weight	5.7 oz./161.9 g
Dimensions	6.5 in. H x 2.6 in. W x 3.6 in. D 16.5 cm H x 6.6 cm W x 9.1 cm D