Settings
124
• Regulatory
• Country selection - Displays the acquired country code if 802.11d is enabled else it displays the
currently selected country code.
• Region code - Displays the current region code.
• Band and Channel Selection
• Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4
GHz only.
• Logging
• Advanced Logging – Touch to enable advanced logging.
• About
• Version - Displays the current Fusion information.
Screen Unlock Settings
Use the Security settings to set preferences for locking the screen.
1. Swipe down from the status bar and then touch .
2. Touch Security.
• Screen lock - Touch to configure the device to require a slide, pattern, PIN, or password to unlock the
screen.
• None - Disable screen unlock security.
• Swipe - Slide the lock icon to unlock the screen.
• Pattern - Draw a pattern to unlock screen. See Set Screen Unlock Using Pattern for more information.
• PIN - Enter a numeric PIN to unlock screen. See Set Screen Unlock Using PIN for more information.
• Password - Enter a password to unlock screen. See Set Screen Unlock Using Password for more
information.
Lock the screen to protect access to data on the device. Some email accounts require locking the screen. The
Locking feature functions differently in Single-user versus Multiple-user mode.
When locked, a slide, pattern, PIN or password is required to unlock the device. Press the Power button to lock the
screen. The device also locks after a pre-defined time-out.
Press and release the Power button to wake the device. The Lock screen displays.
Slide the screen up to unlock. If the Pattern screen unlock feature is enabled, the Pattern screen appears instead
of the Lock screen. If the PIN or Password screen unlock feature is enabled, enter the PIN or password after
unlocking the screen.
Set Screen Unlock Using PIN
1. Swipe down from the status bar and then touch .
2. Touch Security.
3. Touch Screen lock.
NOTE Options vary depending upon the application’s policy, for example, email.