Accessories
53
Extended Power Pack
The Extended Power Pack provides additional power for charging the TC25 battery.
For best performance it is recommended that the Power Pack should always be installed on the device and that
both the Power Pack and device are fully charged at the start of each work shift.
Figure 42 Extended Power Pack Front View
Figure 43 Extended Power Pack Back View
Installation
To install the Power Pack:
1. Align the Power Pack with the TC25.
Figure 44 Align Power Pack with TC25
2. Slide the power pack up onto the TC25 until it snaps into place.
Charging
Charge the Extended Power Pack:
• In a cradle
• In a cradle attached to the TC25
• using a USB cable.
Charging Contacts
USB Port
(Charging Only)
Hand Strap
Mounting Point
To Next Page
Loading...
Need help?
General
