Zebra TC25 User Manual

Wireless
110
Figure 100 Data Usage Screen
Set Data Usage Warning
To set a warning alert when the device has used a certain amount of mobile data:
1. Swipe down from the status bar and then touch .
2. Touch Data usage.
3. Touch Cellular data usage > > Data warning.
4. Enter a number. To switch between megabytes (MB) and gigabytes (GB), touch the down arrow.
5. Touch Set.
When the usage reaches the set level, a notification appears.
Set Data Limit
To set a data usage limit:
1. Swipe down from the status bar and then touch .
2. Touch Data usage.
3. Touch Cellular data usage > > Set data limit.
4. Touch OK.
5. Touch Data limit.
6. Enter a number. To switch between megabytes (MB) and gigabytes (GB), touch the down arrow.
7. Touch Set.
When the limit is reached, data automatically turns off and a notification appears.
Wireless Local Area Networks
Wireless local area networks (WLANs) allow the TC25 to communicate wirelessly inside a building. Before using
the TC25 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known
as infrastructure). The infrastructure and the TC25 must both be properly configured to enable this communication.

Zebra TC25 Specifications

General

Brand	Zebra
Model	TC25
Category	Cell Phone
Language	English