Zetor Proxima 70 2012 User Manual

181
ADJUSTMENTS
E769 E770 E771
CALIBRATION OF TRAVEL SPEED OF
DIGITAL DASHBOARD
Dashboard is calibrated after the
assembly in production plant.
Do the repeated calibration:
− After significant wear of tyres
− When assembling new tyres
− When replacing the dashboard
CALIBRATION PROCEDURE
− On an appropriate area, mark a track
of 100 m length
− Inflate the tyres of the tractor to the
prescribed pressure, see tables of this
Operator´s Manual
− Start the engine
− Locate the tractor at the beginning of
the hundred-metre track
− Press the (A) and (B) buttons
simultaneously. Keep the buttons
pressed for 7 sec. There will be an
acoustic signal and in “c-n-t”
inscription starts flashing on the
display.
− Release both buttons (A) and (B), “c-
n-t” inscription stops flashing
− Start the tractor in a balanced speed of
10 km.h
-1
− After travelling the whole distance of
100 m, stop the tractor on a marked
end of the track (see fig. E769)
− Press (B) button.
− If calibration has been completed
without errors, there will be acoustic
signal and “Pulse” inscription will
appear on the display
− After 2 sec, calibration value will
appear on the display.
− After another 2 sec, the calibration is
automatically completed, dashboard is
calibrated and ready for operation.

Zetor Proxima 70 2012 Specifications

General

Brand	Zetor
Model	Proxima 70 2012
Category	Tractor
Language	English