Zip HydroTap All-In-One BC100/125A User Manual

Page 14 of 24 HydroTap Installation and Operating Instructions - 89650UK - July 2011 v1.01
50 min
50 min
UK 240V GPO
VENT
BOILING
WATER
CHILLED
WATER
BH1
BH2
BH3
BRAIDED HOSE BH1
FROM MAINS WATER SUPPLY
TO TAP(White Ring)
BRAIDED HOSE BH2
FROM ALL-IN-ONE TAP
TO VENTURI(Blue Ring)
BRAIDED HOSE BH3
FROM VENTURI TO TAP
SILICONE HOSE FROM
BOILING WATER TANK
IN HYDRTAP UNIT TO TAP(Red)
SILICONE HOSE FROM
CHILLED WATER TANK
IN HYDROTAP UNIT TO
TAP (Blue)
SILICONE HOSE
FROM STEAM
VENT IN H/TAP
UNIT(Clear)
BH2
B
MAI
N
SUPP
NOTE:
IF THE FLOW RATE IS
TOO FAST, CUT THE RED SILICONE
TUBE 75mm MINIMUM FROM THE
BOTTOM OF THE BASE OF THE
ALL-IN-ONE TAP. INSERT THE
TEFLON RESTRICTOR ABOUT
20mm INTO THE UPPER SEGMENT
OF THE RED SILICON TUBE WHICH
CONNECTS TO THE TAP. INSERT
THE BLACK PLASTIC OUTLET BUSH
BETWEEN THE TWO PIECES OF
RED SILICON TUBES THAT WAS CUT.
SILICONE HOSE FROM
BOILING WATER TANK
IN HYDROTAP UNIT TO TAP (Red)

Zip HydroTap All-In-One BC100/125A Specifications

General

Brand	Zip
Model	HydroTap All-In-One BC100/125A
Category	Water Heater
Language	English