Page 18 of 24 HydroTap Installation and Operating Instructions - 89650UK - August 2011 v1.02
Warning: If the HydroTap is switched off for a long period of time (e.g.
more than a weekend), run water through the chilled water outlet for at least
5 minutes before consumption.
Boiling Water Lever
Depressing the “Red” lever allows dispensing of Boiling water.
Pulling up the Red lever allows the tap to operate in a “no-touch” mode. Water
will flow
from between 5 and 15 seconds (This is user adjustable). To reset, return
the handle to the “Off” position and repeat the step. The lever has to be manually
returned to the “Off” position.
Chilled Water Lever
Depressing the “Blue” lever allows dispensing of Chilled water.
Pulling up the Blue lever allows the tap to operate in a “no-touch” mode. Water
will flow from between 5 and 15 seconds (This is user adjustable). To reset, return
the handle to the “Off” position and repeat the step. The lever has to be manually
returned to the “Off” position.
Safety Lock
The safety lock is designed to prevent the flow of boiling water, if the hot lever is
inadvertently activated.
To operate when lock is ON, depress both the Red lever and the safety lock
simultaneously.
Note: On the Boiling only models
the Chilled LED is blank.
Boiling
ChilledFilter Change
Safety Lock
Operating the HydroTap
(continued)
Child Safety Lock
The child safety lock can be activated to prevent boiling
water flowing if the hot lever is inadvertently activated.
To activate, first press the safety lock then depress the
Blue Chilled water lever for a period of approximately ten
seconds. The safety lock indicator light will now be illuminated.
To de-activate, first press the safety lock then depress the
Blue Chilled water lever for a period of approximately ten
seconds. The safety lock indicator light will now extinguish.
To operate when the lock is ON, depress both the Red lever and the
safety lock simultaneously.
Child Safety Lock
Child safety Lock
To Next Page
Loading...
Need help?
General
