Zte Unite Mobile Hotspot User Manual

6
Hardware Installation
Installing the 4G LTE SIM Card
If you have not already done so, please follow these instructions for the installation of your new SIM card
which is in the package:
1. Remove the SIM card from the outer card, being careful not to touch the gold contacts.
2. Turn the power off. Remove the battery cover and take the battery out. Locate the SIM card slot. Hold
the card so the writing on the back of the card is facing you and the gold contact points are properly
aligned with the SIM card slot.
3. Insert the SIM card into the slot until it is fully inserted.
NOTES:
 The SIM card MUST remain in your ZTE Unite when in use. Once the SIM card has been inserted into
the ZTE Unite, do not remove!
 Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt.
 If your SIM card is separated from the ZTE Unite
or damaged, your ZTE Unite will not work. If you
encounter any issue with your ZTE Unite, contact Customer Service at 1-888-944-9400 or visit your
nearest U.S. Cellular
®
Inserting and Charging the Battery
retail location.
1.
Use the thumb catch at the bottom of your ZTE Unite to open the battery cover and align the battery
contacts with the terminals in the battery compartment as shown. Push the battery down until it clicks
into place.
2. Place the battery cover over the battery compartment and press it downward until it clicks into place.

Zte Unite Mobile Hotspot Specifications

General

Brand	Zte
Model	Unite Mobile Hotspot
Category	Wireless Router
Language	English