Zte Unite Mobile Hotspot User Manual

8
Connecting to the Internet
With your ZTE Unite, a wireless Internet connection can always be at your fingertips.
Connecting Wi-Fi Enabled Devices To Your ZTE Unite
NOTE
: It is recommended the battery be fully charged in order to use your ZTE Unite via Wi-Fi for the first
time, or connect the device to the wall adapter for power.
The following should occur once you power on your ZTE Unite:
 Your ZTE Unite is powered on as soon as you slide the
Power Switch
to
On
and the display lights up.
 Once your ZTE Unite is powered on and has been activated, it automatically connects to the Internet
provided that Mobile Broadband service is available and one or more Wi-Fi devices are connected.
 The Service (4G LTE, 3G, and 1X), Signal Strength , and Data Connected icons on your ZTE
Unite indicate it is in service and ready to connect.
Follow these Steps:
1. Use your normal Wi-Fi application on your computer to establish a connection to your ZTE Unite.
2. Look for the network (SSID) named “
USCC-EuFi891-XXXX
”.
XXXX
varies from device to device.
3. Click
Connect
and enter the default password printed beside the battery compartment of your ZTE
Unite.
NOTE: Your password will also be displayed on the ZTE Unite screen each time the ZTE Unite is powered
on.
Accessing the Internet
After successfully establishing the connection between your ZTE Unite and Wi-Fi clients, you can access
the Internet in the Auto Connect, Manual Connect mode. The default mode is Auto Connect.

Zte Unite Mobile Hotspot Specifications

General

Brand	Zte
Model	Unite Mobile Hotspot
Category	Wireless Router
Language	English