To Next Page

To Previous Page

ZXA10C300CongurationManual(CLI)

Enterconfigurationcommands,oneperline.EndwithCTRL/Z.

ZXAN(config)#

2.Addtheuplinkporttothein-bandNMVLAN.

ZXAN(config)#interfacegei_1/21/1

ZXAN(config-if)#switchportvlan1000tag

ZXAN(config-if)#exit

Note:

WhenyouusetheswitchportvlancommandtoconguretheportVLAN,thesystem

automaticallycreatestheVLAN.

3.Congurethein-bandNMIPaddress.

ZXAN(config)#interfacevlan1000

ZXAN(config-if)#ipaddress10.1.1.1255.255.255.0

ZXAN(config-if)#exit

Note:

Theout-of-bandandin-bandNMIPaddressescannotbeinthesamenetwork

segment.

4.Congurethein-bandNMroute.

ZXAN(config)#iproute10.2.1.0255.255.255.010.1.1.254

5.ConguretheSNMPcommunityname.

ZXAN(config)#snmp-servercommunitypublicviewallviewrw

Note:

TheSNMPcommunitynameshouldbeconsistentwiththatontheNMS.

6.ConguretheIPaddressoftheSNMPserver.

ZXAN(config)#snmp-serverhost10.2.1.1version2cpublicenablenotificationstar

get-addr-nameztetarget-param-namezteudp-port162

7.Savethecongurationdata.

ZXAN(config)#exit

1-6

SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential

Other manuals for Zte ZXA10 C300

Questions and Answers:

Need help?

Do you have a question about the Zte ZXA10 C300 and is the answer not in the manual?

General