Zte ZXA10 C300 User Manual

ZXA10C300CongurationManual(CLI)
4.EnabletheMPLSontheVLANinterface.
ZXAN(config-if-vlan10)#mplsip
ZXAN(config-if-vlan10)#exit
5.Conguretheroutingprotocol.
ZXAN(config)#routerospf1
ZXAN(config-router)#network1.1.1.10.0.0.0area0.0.0.0
ZXAN(config-router)#network10.1.1.00.0.0.255area0.0.0.0
ZXAN(config-router)#exit
6.EnabletheglobalMPLSfunction.
ZXAN(config)#vlan-reserve4090vpn
ZXAN(config)#ipmpls-forwardingenable
ZXAN(config)#mplsldprouter-idloopback1
ZXAN(config)#mplsip
7.ConguretheLDPtargetsession.
ZXAN(config)#mplsldptarget-session3.3.3.3
8.ConguretheVC.
ZXAN(config)#pw3and1000pw
ZXAN(config-pw)#modedynamicpwe3fec128
ZXAN(config-pw)#pwtypeethernet
ZXAN(config-pw)#peer3.3.3.3router-id3.3.3.3vcid1000
ZXAN(config-pw)#exit
9.ConguretheVLL.
ZXAN(config)#vllpwe3-vll
ZXAN(config-vll)#service-typeethernet
ZXAN(config-vll)#mplsxconnectpw3and1000pw
ZXAN(config-vll)#exit
10.Conguretheclassmap.
ZXAN(config)#class-mapclassmap1000
ZXAN(config-cmap)#matchsvlan-id1000
ZXAN(config-cmap)#exit
11.ConguretheCIP .
ZXAN(config)#cip1
ZXAN(config-cip1)#service-typeethernetclass-mapclassmap1000
ZXAN(config-cip1)#xconnectpwe3-vll
ZXAN(config-cip1)#exit
12.Savethecongurationdata.
lCongurationonC300-2.
1.Conguretheloopbackinterface.
ZXAN(config)#interfaceloopback1
ZXAN(config-loopback1)#ipaddress2.2.2.2255.255.255.255
16-58
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential

Zte ZXA10 C300 Specifications

General

Model	ZXA10 C300
Manufacturer	ZTE
Humidity	5% to 95% (non-condensing)
Uplink Ports	2 x 10GE
Supported Standards	IEEE 802.3ah, ITU-T G.984.x
GPON Ports per card	8
EPON Ports per card	8
Ports	GPON/EPON ports
Storage Temperature	-40°C to +70°C
Dimensions	482.6 mm