Zte ZXHN H3601 User Manual

ZXHN H3601 Maintenance Management Guide
Figure 6-8 DHCP Server(IPv4) Page
2. Configure the DHCP server parameters.
Table 6-6 lists the DHCP server parameters.
Table 6-6 Parameter Descriptions for the DHCP Server
Parameter Description
DHCP Server Select On to let the device work as a DHCP server and
assign IP addresses to open the client PCs or wireless
devices.
LAN IP Address The IPv4 address of LAN.
Subnet Mask Subnet mask of the device.
DHCP Start IP Address The start IP address of the DHCP address pool.
DHCP End IP Address The end IP address of the DHCP address pool.
ISP DNS Select the On check box to let the Assign IspDNS work.
Primary DNS IP address of the DNS server, provided by ISP.
Secondary DNS IP address of the DNS server2, provided by the ISP.
Lease Time Mode The mode of Lease Time.
Custom Lease Time The time during which the client PCs use the IP address
assigned by the DHCP server.After the lease time expires,
the private IP address will be available for assigning to
other network devices.
3. Click Apply button to apply the changes.
DHCP binding
6-8 SJ-20200429083356-004 | 2020-07-23(R1.0)

Zte ZXHN H3601 Specifications

General

USB Ports	1 x USB 2.0
POTS Ports	2
Power Supply	12V DC, 1.5A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Wi-Fi Standards	802.11 a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
WAN Port	1 x GPON
GPON Interface	1 x GPON
Ethernet Ports	4 x GE