Zte ZXV10 H11X User Manual

ZXV10 H11X (V1.0)Home Gateway User’s Manual
132 Confidential and Proprietary Information of ZTE CORPORATION
MGCP Typical Configuration
Step 1 Select Protocol Type
1. Click the VOIP button on the WEB page to enter the VOIP
configuration page.
2. Click the General link on the left part of the page to enter
the General configuration page for VOIP.
3. Select MGCP from the Signaling protocol box.
4. Set the Length and Prefix of the internal phone number
from Ext. number setup.
5. Whether enabling Two-stage dialing flag.
6. Click the Apply button to finish the MGCP protocol
selection.

Zte ZXV10 H11X Specifications

General

Model	ZXV10 H11X
Category	Gateway
Wireless	Yes
Operating Temperature	0°C to 40°C
Humidity	5% to 95% (non-condensing)
Antennas	2
Supported Protocols	IEEE 802.11b/g/n
Power Supply	12V DC