Chapter 1 - Product Profile
Confidential and Proprietary Information of ZTE CORPORATION 19
Indicator Status Description
Green indicator always on The physical link connection is normal
Off
The device is powered off/the network
cable is not connected
LAN
1 2 3 4
Green flashing
Flashing according to the network
traffic
The following table describes the buttons on the back panel in
details.
Button Function Description
WLAN button
Press this button for more than 1 s to start or close
Wi-Fi.
Bluetooth
button
Press this button for more than 1 s to start or close
Bluetooth.
RST
Resetting
button
Holding on the key for more than five seconds allows
you to reset the current configuration to the factory
default settings, and the system will then restart
automatically (all the four indicators of the LAN port
will be lit after restart).
Side panel
The side panel provides two RJ-45 LAN network interfaces,
one USB Slave interface, USB Host interface and one
CardBus interface.
To Next Page
Loading...
Need help?
General
