Chapter 5 - Advanced Configuration
Confidential and Proprietary Information of ZTE CORPORATION 67
IPQoS Configuration
Click the IPQoS link on the left part of the page to enter the IPQoS
configuration page. Select to enable the IPQoS function at a WAN
side interface, and configure the relevant IPQoS policy. Configure
the IPQoS rule and relevant parameters of the queue dispatching
algorithm based on priority and weight. You can define different
priorities for the data flows of different applications to send the data
at a higher priority first, and limit bandwidth for the specified data
flow to ensure the bandwidth of other data flows.
WAN Connection
Selecting a WAN connection as the egress interface bound
with the IPQoS
Enable IPQoS
Enabling switch for IPQoS
Link Speed
Uplink bandwidth of the WAN connection in the unit of
kbps
Borrow
To Next Page
Loading...
Need help?
General
