3xLogic VISIX S-Series User Manual

VISIX S-Series Network Camera | USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
13
Connecting the network camera via a modem:
This camera supports the PPPoE auto dial-up function. The camera gets a public IP address by ADSL dial-up after
the camera is connected to a modem. You need to configure the PPPoE parameters of the network camera. Refer
to Configuring PPPoE Settings
for detailed configuration.
Figure 2-7 Accessing the Camera with Dynamic IP
NOTE: The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes after rebooting
the camera. To solve the inconvenience of the dynamic IP, you need to get a domain name from the DDNS
provider (E.g. DynDns.com). Please follow the steps below for normal domain name resolution and private domain
name resolution to solve the problem.
NORMAL DOMAIN NAME RESOLUTION
Figure 2-8 Normal Domain Name Resolution
Steps:
1). Apply a domain name from a domain name provider.
2). Configure the DDNS settings in the DDNS Settings interface of the network camera. Refer to
Configuring
DDNS Settings for detailed configuration.
3). Visit the camera via the applied domain name.

3xLogic VISIX S-Series Specifications

General

Brand	3xLogic
Model	VISIX S-Series
Category	Security Camera
Language	English