3xLogic VISIX S-Series User Manual

VISIX S-Series Network Camera | USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
80
Figure 6-33 Expert Mode
 Defog Mode
The user can set the Defog Mode to ON or OFF as required by the environment.
Figure 6-34 Defog Mode
 EIS (Electronic Image Stabilization)
The user can set the EIS to ON or OFF as required.
Figure 6-35 Electronic Image Stabilization
Video Adjustment
NOTE: Functionality may vary depending on different camera models.
 Mirror
If you turn the MIRROR function on, the image will be flipped. The flip direction can be set to OFF or CENTER.
 Video Standard
The user can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video system in your
country.
 Capture Mode
The user can disable this function or select the capture mode from the list.
Other
NOTE: Functionality may vary depending on different camera models.
 Lens Initialization
The lens operates the movements for initialization when you enable Lens Initialization.
 Zoom Limit
The user can set Zoom Limit value to limit the maximum value of zoom. The value can be selected from the
list.
CONFIGURING OSD SETTINGS
Purpose:
The camera supports following on screen displays:
► Time: Supports for time display.
► Camera Name: Identifies the name of camera.
The user can customize the on-screen display of the camera timestamp.
Steps:
1. Enter the OSD settings interface: Configuration > Image > OSD Settings

3xLogic VISIX S-Series Specifications

General

Brand	3xLogic
Model	VISIX S-Series
Category	Security Camera
Language	English