ACH550-UH User’s Manual 1-9
Installation
Installation
Study these installation instructions carefully before proceeding. Failure to observe
the warnings and instructions may cause a malfunction or personal hazard.
WARNING! Before you begin read Safety on page 1-3.
Installation flow chart
The installation of the ACH550 adjustable speed AC drive follows the outline below.
The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
Task See
PREPARE for installation Preparing for installation on page 1-10.
PREPARE the mounting location Prepare the mounting location on page 1-14.
REMOVE the front cover Remove front cover on page 1-16.
MOUNT the drive Mount the drive on page 1-17.
INSTALL wiring Wiring overview on page 1-18 and
Install the wiring on page 1-23.
CHECK installation Check installation on page 1-27.
REINSTALL the cover Re-install cover on page 1-27.
APPLY power Apply power on page 1-29.
START-UP Start-up on page 1-30.
To Next Page
Loading...
Need help?
General
