246 ACH580 E-Clipse bypass and packaged drive user manual
Technical data
Applicable standards
Packaged drive compliance with the following standards is identified by the
standards “marks” on the type code label.
Compliance is valid with the following provisions:
• The motor and control cables are chosen as specified in this manual.
• The installation rules of this manual are followed.
Additional ACH580-01 standards information can be located in the Technical data/
applicable standards section of the ACH580 Hardware Manual
(3AXD50000044839).
Mark Applicable Standards
UL 508A UL Standard for Industrial Control Panels
To Next Page
Loading...
Need help?
General
