Appendix A – ACS/ACC/ACP 604/607 Technical Data
ACS/ACC/ACP 604/607 Drives ACx=ACS/ACC/ACP A-21
ACS 607 Enclosure
Size and Style
The ACS 607 enclosure size and style is determined by the following
product and option selection items as indicated by the Type Code. The
ACS 600 Type Codes are explained in detail in Chapter 2.
The dimension and weight table on the following page lists power and
voltage rating type codes and provides dimensions for each listing. The
Height column contains two sets of figures, one for the IP 21 / IP 22 /
IP 42 version and one for the IP 54 version. Several columns are
provided to show the enclosure widths for the various combinations of
EMC filter and braking options. The letters A), B) etc. included in the
width columns indicate the applicable dimension drawings in Appendix
B as listed in the table notes below.
Notes for the ACS 607 Dimension Table
Product and Option Selection Item
Type Code
Character No.
Power Rating 7 - 10
Voltage Rating 11
Enclosure degree of protection (IP No.) 17
EMC (RFI) Filters 20
Braking chopper and cabling direction 21
Notes:
1)
Height of the IP 21 / IP 22 / IP 42 version.
Height including IEC cable glands for top entry/exit
is 2132 (83.9 in).
2)
Height of the IP 54 version.
3)
Weight of the IP 21 / IP 22 / IP 42 version
4)
Weight of the 690 V unit with dv/dt filter
Applicable Dimension
Drawings in Appendix B:
A)
3AFE 61417184
B)
3AFE 61417206
C)
3AFE 61417214
D)
3AFE 61477390
E)
3AFE 61417222
F)
3AFE 61477381
G)
Refer to factory
To Next Page
Loading...
Need help?
General
