ABB Advant Controller 80 User Manual

Chapter 1 – Introduction
1-4 AC 80 User’s Manual
I/O Station
An I/O station consists of an AC 80 (or an FCI), 1 to 7 I/O clusters and
up to 24 I/O devices.
ISU
Inverter Supply Unit; one of ACS 600 supply unit types.
ModuleBus
An incremental, electrical or optical bus for interconnection of I/O
devices.
MTU
Module Termination Unit; a passive unit onto which an I/O module is
mounted. The MTU contains the process I/O terminals and part of
Electrical ModuleBus.
OSP
Outputs Set as Predetermined; a user-configurable action on an output
module when communication is lost to the AC 80.
S800 I/O
Type of a distributed modular I/O unit which communicates with Advant
controllers over an AF100 bus or directly with AC 80.
Special I/O
An interface for special I/O, such as the NBIO-31 I/O unit, the NPCT-01
Pulse Counter Board, or DSU connections.
Tools
PC software (such as Drive Window and FCB) used for monitoring and
controlling drives, or designing drive application programs.
TSU
Thyristor Supply Unit; one of ACS 600 supply unit types.
Related Publications
AC 80 PC Elements Reference Manual (3BFE 64021737, English)
Advant Fieldbus 100 User’s Guide (3BSE 000 506, English)
Firmware Manual for ACS 600 System Application Program
(3AFY 63700177, English)
Firmware Manual for ACS 600 Standard Application Program
(3AFY 61201441, English)
Function Blocks for APC2 (3AFY 61281240, English)
S800 I/O User’s Guide (3BSE 008 878, English)
Use of PROFIBUS-DP Protocol in Advant Controller 80
(3BFE 64248260, English).

ABB Advant Controller 80 Specifications

General

Brand	ABB
Model	Advant Controller 80
Category	Controller
Language	English