Electronic Commercial Water Meter
AquaMaster™ 2 Mechanical Installation
12 IM/AM Issue 13
2.4.3 Installing a SIM Card
Fig. 2.22 Installing a SIM Card
Warning. Disconnect all power from the transmitter before opening the SIM card holder. If the power is
not disconnected the SIM card may be corrupted and therefore be unusable.
1
If the transmitter is not fixed in any way, arrange or
hold it with the top cover uppermost.
2
Wash off any loose dirt from the case using plain
water.
Remove the transmitter top cover and battery
mounting tray see Fig. 3.12.
3
4
6
Close the SIM card holder cover and slide into
locked position.
Refit the battery mounting tray and the transmitter
top cover see Fig. 3.12.
7
Slide to unlock and open the
SIM card holder cover
5
Insert the SIM card,
contact side down
and bevelled edge
first, into the SIM card
holder.