ABB MEASUREMENT & ANALYTICS |
OPERATING INSTRUCTION | OI/AO2000- LS25-EN REV. D
-LS25
—
ABB Measurement & Analytics
For your local ABB contact, visit:
For more product information, visit:
General purpose and
hazardous areas
Measurement made easy
-LS25-EN Rev. D 09.2021
Introduction
As an integrated part of the Advance Optima
series the LS25 can be combined with further
analyzer modules and completely operated
remotely in Ethernet networks.
The LS25 has ATEX, IECEx and CSA certificates for
use in for use in hazardous areas.
Additional documentation on AO2000-LS25 is
available for download free of charge at
www.abb.com/analytical.
Alternatively simply scan this code:
We reserve the right to make technical changes or modify the contents of this document
without prior noti
ce. With regard to purchase orders, the agreed particulars shall prevail.
ABB does not accept any responsibility whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the subject
matter and illustrations contained
therein. Any reproduction, disclosure to third parties or utilization of its contents
– in whole
– is forbidden without prior written consent of ABB.
© ABB 2021 3KXG161011R4201
To Next Page
Need help?
General
