66 AO2000-LS25 LASER ANALYZERS | OI/AO2000-LS25-EN REV. D
… 10 Configuration, parameterization
… Description of menus and parameters
<Manual instrument control>
Enter Sleep mode
The instrument will be forced into Sleep mode.
Reset Microcontroller
Microcontroller is reset.
Collect AD statistics
For service purpose only.
Current loops and digital i/o
This menu is for testing the 4 to 20 mA inputs or outputs mainly
during installation of the analyzer.
Note that the instrument will be set into sleep mode for these
tests.
Save system log
See <View error log> on page 57.
Rewind system log 100 lines
See <View error log> on page 57.
To Next Page
Loading...
Need help?
General
