ABB EasyLine Series User Manual

Preparation for Installation 15
Material Required for the Installation (not supplied)
Gas Connections
 For the connection of pipelines: Threaded connections with a 1/8 NPT
thread and PTFE sealing tape
Fidas24: Use only metal threaded connectors!
Fidas24: Gas lines
Process gases, test gases and waste air
 PTFE or stainless steel tubes with 4 mm inside diameter and
PTFE or stainless steel tube with at least 10 mm inside diameter for
waste air
 Tube fittings
 Pressure regulator
 Flow restrictor in the combustion gas supply line (see page 29)

Shut-off valve in the combustion gas supply line (see page 29)
Sample gas

Heated sample gas line (recommended: TBL 01) or
unheated sample gas line (PTFE or stainless steel tube with
inside/outside diameter 4/6 mm).
The fittings and O-rings required for the connection are included in
the scope of supply and delivery of the gas analyzer.
Flowmeter/Flow Monitor
 Flowmeter or flow monitor with a needle valve for adjustment and
monitoring of the sample gas flow rate and purge gas flow rate if
required
 Notes for the selection and use of flowmeters:
 Measuring range 7…70 l/h
 Pressure drop < 4 hPa
 Needle valve open
Recommendation: Flowmeter 7…70 l/h, Part Number 23151-5-
8018474

ABB EasyLine Series Specifications

General

Brand	ABB
Model	EasyLine Series
Category	Measuring Instruments
Language	English