24 M1M 30 POWER METER USER MANUAL
6.2.Real Time Clock (RTC)
Setting date and time is mandatory in order to use the time-related functionalities on the device
(Historicals). Please notice that if no date and time are set, no timestamp will be available on the
measured data.
CONF UNIT RTC
1. First setup is date, in the format of MM/DD/YY
2. Second setup is time, in the format of hh:mm:ss.
6.3.Wiring (WIRI)
In order to configure the type of network it is needed to choose one of the available options according to
the installation conditions.
CONF INSTL WIRI
1. Scroll the list of fields “Up” or “Down”
2. Select one option by pressing “Enter”
Type Description
3N3T Three-phase, four-wire and 3 CTs
3 3T Three-phase, three-wire and 3 CTs
3 2T Three-phase, three-wire and 2 CTs
3 1T Three-phase, three-wire and 1 CT
1N1T Single-phase, two-wire and 1 CT
To Next Page
Loading...
Need help?
General
